Installation

Stone Haus Natural Stone Veneer is easy to install over any sound surface, wood frame, rigid foam insulation, bricks, concrete and stucco.

  1. WOOD FRAME
    Moisture Barrier, Mortairvent with filter cloth (designed by advanced building products Inc). Metal Lath, Scratch Coat, Natural Stone Veneer, Mortar Joint.

  2. RIGID FOAM INSULATION
    Foam sheathing, Moisture Barrier, Metal Lath, Scratch Coat, Natural Stone Veneer, Mortar Joint.

  3. BRICKS, CONCRETE, STUCCO
    1/2″ Scratch Coat, Natural Stone Veneer, Mortar Joint.

  4. SURFACE
    Painted or Sealed Walls, Dirty Surface
    Sand blast, water blast to original surface and wash thoroughly or cover wall with metal lath.

  5. MEASURING YOUR PROJECT
    – Multiply length times the height of each surface area.
    – Deduct all open areas such as windows and doors.

  6. INSTALLATION OVER PLYWOOD FRAME
    For exterior projects, you will require a moisture barrier and also a rain screen system, for water protection. Note: (Confirm local build codes and requirements prior to installation)

  7. CUTTING TOOLS
    The most precise cuts are obtained with a diamond blade using a wet circular saw, resulting in a more finished look, for trimming use a dry diamond circular saw. Note: Use safety glasses and dusk mask when cutting.
     
    INSTALLATIONS FOR MOISTURE BARRIER
    We recommend applying #15 felt paper or better to the surface of the wall, staple firmly secure the paper to the surface. Next apply Mortairvent 10mm (Designed by Advanced Building Products Inc).

Stone Haus Inc

(905) 770-8882

70 Newkirk Rd. Unit 4
Richmond Hill, ON L4C 3G3